3-speed wipermotor

[Haflinger]

I bought a new concours wipermotor for my -68 Charger but evidently it's a late car so it should have the one for 69-71. I guess the armsystem
differs since the outgoing axle of the motor is excentric on the -68 and
not on the -69-71. Any ideas?

 

[696pack]

It is quite an expensive undertaking to convert from 2 speed to 3 speed wipers to buy all of the required items.

The wiper motor itself will not give you three speeds or work properly by itself. You need a three speed dash switch and the correct linkage. I belive that the linkage cam is available repro. I would check with Julies the Wiperman regarding this issue and availablility.

 

[Haflinger]

Thanks for your input but the motor I have is a 3-speed but the difference
between early -68 and the rest is the outgoing shaft. The later just turns
around while theearly one I have has an excentric move. My thought was
to only swap that axle.

 

[696pack]

Again, jules the Wiper man knows nore about these things than anyone and should be able to help you out.

 

[Plymouthfan]

It is quite an expensive undertaking to convert from 2 speed to 3 speed wipers to buy all of the required items.

You said it brother!