detmatt1
Well-Known Member
Hello all, I picked up a “lot“ of parts last year and included were 2 forged cranks for 355 c.i. small block. 1 looked like it had gone through some tough times and for lack of wanting to sell scrap I took them to Performance Crankshaft here in the Detroit area to have them magnifluxed. The one that looked rough was in fact cracked but the other checked out good in that regard.
The mains measure 2.479”
The rod journals measure 2.125”
The stroke measures 3.450”
8 bolt flange with 1/2” - 20 threads.
There is a date stamped 9-21-‘76 followed by “945” which I believe is the last 3 digits of the part number. $800 + shipping from the Detroit area or better yet come pick it up.
The mains measure 2.479”
The rod journals measure 2.125”
The stroke measures 3.450”
8 bolt flange with 1/2” - 20 threads.
There is a date stamped 9-21-‘76 followed by “945” which I believe is the last 3 digits of the part number. $800 + shipping from the Detroit area or better yet come pick it up.
