383 six pack intake?

[BB BEEPER]

Ok, Did ma MOPAR ever make a 6 pack intake for a 383, low deck B motor. I know there are some aftermarket 3-2 barrel intakes for the 383.
If they did make them were they aluminum or cast iron?
Thanks in advance for the information.

 

[6PKRTSE]

Not factory. Edelbrock made them for a few years. I have one new in the box still. They are aluminum.

 

[BB BEEPER]

Then, if someone had a cast iron, 6 bbl intake with a cast date of 11-5-69, would that be for a B or RB motor?

 

[DeltaV]

Then, if someone had a cast iron, 6 bbl intake with a cast date of 11-5-69, would that be for a B or RB motor?

For an RB. Specifically, a 440.

 

[6PKRTSE]

Then, if someone had a cast iron, 6 bbl intake with a cast date of 11-5-69, would that be for a B or RB motor?

Rb only for 70 cast iron intakes.

 

[BB BEEPER]

Thank you, guys!

 

[DeltaV]

Thank you, guys!

Let us know how much it weighs if you get it.
Thanks!

 

[DeltaV]

From various websites (bare manifold):
Cast iron 440 4bbl intake: 38.6 lbs
Cast iron 440 3x2 intake: 41 or 42 lbs
Cast aluminum 440 3x2 intake: 22.2 lbs

 

[Mopar Hunter]

Cast aluminum 3x2 intake: 22.2 lbs

Is that a 440 6 pack manifold weight or a 383?

 

[DeltaV]

Is that a 440 6 pack manifold weight or a 383?

Oh, sorry. For a 440 six pack. Updated above.

I'll weigh my bare 383 3x2 intake tomorrow and post a follow-up.

 

[DeltaV]

From various websites (bare manifold):
Cast iron 440 4bbl intake: 38.6 lbs
Cast iron 440 3x2 intake: 41 or 42 lbs
Cast aluminum 440 3x2 intake: 22.2 lbs

Found a picture of a 440 3x2 cast iron manifold on the scales.

It shows 54.6 lbs

Cast 2946276