4 speed transmission rebuild

[mopar 394]

Can anyone give me a good place to get a 4 speed rebuilt? Preferably about 120 miles around Fort Wayne Indiana. Thanks

 

[pnora]

http://www.brewersperformance.com/4speed.php

 

[RJRENTON]

Can anyone give me a good place to get a 4 speed rebuilt? Preferably about 120 miles around Fort Wayne Indiana. Thanks

POSSIBLY CONSIDER....
Technical Advice: Available by calling (317) 831-5610 Monday - Thursday, between the hours of 4:00 PM - 6:00 PM EDT, faxing (317) 831-9710, emailing us at [email protected] or writing to A&A Transmission, 5061 E N County Line Road, Camby, IN 46113.

A&A Transmissions
5061 E N County Line Road
Camby, IN 46113
(317) 831-3066
They are an EXCELLENT source for automatic transmission parts. IF they don't do 4 speeds, perhaps they can recommend some one near you.
BTW....PASSON Performance is another Excellent source but they are in Pennsylvania.
BOB RENTON

 

[69 hemibee]

If you are mechanically inclined you can do it yourself with a rebuild kit in a weekend. I just did it and was glad I did.

 

[mopar 394]

Does it require any specialty tools?

 

[Beekeeper]

Does it require any specialty tools?

like hemi bee and others here I did mine myself as well very easy task and no special tools other than a length of 3/4” emt conduit for installing the needle bearings in the counter gear and installing it in the case. You will need a press to remove and install the bearings.

 

[69 hemibee]

I bought a rebuild book off Amazon from passion performance and a rebuild kit from Brewers. As mentioned, a arbor press is nice but you can creative on pressing the new bearings on the tail shaft.

 

[WileERobby]

Don't lose the roller bearings... they like to hide in hidden places. Especially after they all come falling out like marbles. Don't ask me how I know that.