SOLD 413 Bored to 426 Engine

[Billintruder]

View attachment 291954:hello2: 413 Bored to 426 Block restored by Bill Cannon Garage, Delaware. New Mopar performance forged crank, balanced, LY rods balanced, but they have 383 pistons on them.

Heads milled, lightly ported, new bronze wall valve guides, Mopar performance oversized valves.

Will break up parts separately or sell whole engine for $1500.

More parts available also!

 

[Hossbee]

Could I get pictures? Thanks

 

[Billintruder]

Picture of motor.

Could I get pictures? Thanks[

Here is picture u requested. The motor appears to be bolted together. The cranks and pistons are in it with brand new klevite bearings in no particular just for storing it. The block has been done at the machine shop and is ready to use. The crank is new and balanced but the Pistons on the rods are 383. It would make a good blower motor compression is too low for the street.

 

[Hossbee]

Was looking for a good 440 street motor. Thanks Randy

 

[dieseldazzle]

Sent you a pm for head information...

 

[Billintruder]

Sent you a pm for head information...

The heads are 63 383 or426 street they have been planed new silicon bronze wall valve guides mp 1.8i 1.74 ex have been port matched and mildly ported they are also closed chamber

 

[Billintruder]

Did you get my message on the heads they also have crower springs

 

[speedchangesyou]

Can you call me about the motor chuck merken (send PM) or email me directly

 

[Billintruder]

View attachment 291954:hello2: 413 Bored to 426 Block restored by Bill Cannon Garage, Delaware. New Mopar performance forged crank, balanced, LY rods balanced, but they have 383 pistons on them.

Heads milled, lightly ported, new bronze wall valve guides, Mopar performance oversized valves.



More parts available also!