6T5
Well-Known Member
Ross 4.280
0 deck
15cc dish
mopar pin
These were $1000 buckaroos when ordered.
With a milled 906 might work for pump gas.
With a real closed chamber would come out around 9-10:1, perfect.
They are scuffed on the skirts...shouldn't really effect much...you decide.
Get that old 413 out and punch it...find those old 516's...then you can say your really have a 426.....of course most people will say, "Oh wow, a real hemi! My uncle has a hemi in his Ram 1500, pops wheelies..."
I'll shut up now.
uh, $300 for the pistons
Buy these & you can have some LY rods for $150...resized, trick bolts, polished beams.
0 deck
15cc dish
mopar pin
These were $1000 buckaroos when ordered.
With a milled 906 might work for pump gas.
With a real closed chamber would come out around 9-10:1, perfect.
They are scuffed on the skirts...shouldn't really effect much...you decide.
Get that old 413 out and punch it...find those old 516's...then you can say your really have a 426.....of course most people will say, "Oh wow, a real hemi! My uncle has a hemi in his Ram 1500, pops wheelies..."
I'll shut up now.
uh, $300 for the pistons
Buy these & you can have some LY rods for $150...resized, trick bolts, polished beams.
