Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
started to put engine on k frame and engine mounts are about 6" wider than k-frame mount holes. '67 charger had 318 in it and 440 is from motor home. mounts look like what I see on internet. this is what I had on right side in 1st 2 pics. 3rd pic. is what is on left side.
Are those the mounting brackets that came with the motor home engine? You need mounting brackets for a 1967 Charger. Schumacher is out of stock on his brackets but you might find some used ones somewhere or perhaps there is someone else who reproduces them. The isolator pads are easy to find, it is the steel brackets that can be a little tougher to round up.
Obviously this has already been solved by the above, ran into this same issue this last summer installing a motor home 440 into my 67 charger. ended up picking up mount brackets from 440source. Worked like a charm. http://store.440source.com/Engine-Support/products/27/