Roadrunner40
Well-Known Member
I have a 505 started as a standard 440 now has Callies 4.25 crank Scat rods Diamond 11:1 pistons with 13CC dish. Trickflow 270 Heads currently has 1 bolt holding them on
Harland Sharp 1.6 roller rockers. Comp solid roller cam .678 lift @1.6 .264 .270@ 50 duration 108 LSA. Smith brothers 3/8 HD push rods. Indy intake with Thumper 1050 plus dominator. Everything is brand new professional built with all paperwork!
HAVE NOT DYNO YET! Should make 700 plus hp on pump gas. Top end needs installed I have everything to complete all new ARP bolts studs and Cometic head gaskets and intake gaskets.
YES I WILL SEPARATE TOP END FOR RIGHT PRICE!
Send me a pm if interested please.
I WILL CRATE AND SHIP TO ANYWHERE AT YOUR EXPENSE
ALSO CAN DELIVER TO MOPAR NATIONALS
IN COLUMBUS
CAST DISTRIBUTOR IN PICS DOES NOT COME WITH IT.
Cost over $17000 to build
$15500 OBO
Located in East Palestine Ohio
Harland Sharp 1.6 roller rockers. Comp solid roller cam .678 lift @1.6 .264 .270@ 50 duration 108 LSA. Smith brothers 3/8 HD push rods. Indy intake with Thumper 1050 plus dominator. Everything is brand new professional built with all paperwork!
HAVE NOT DYNO YET! Should make 700 plus hp on pump gas. Top end needs installed I have everything to complete all new ARP bolts studs and Cometic head gaskets and intake gaskets.
YES I WILL SEPARATE TOP END FOR RIGHT PRICE!
Send me a pm if interested please.
I WILL CRATE AND SHIP TO ANYWHERE AT YOUR EXPENSE
ALSO CAN DELIVER TO MOPAR NATIONALS
IN COLUMBUS
CAST DISTRIBUTOR IN PICS DOES NOT COME WITH IT.
Cost over $17000 to build
$15500 OBO
Located in East Palestine Ohio
