64 Polara Manual Steering box

[Terry1213]

I want to swap to a 24:1 stock-style manual steering box. Has anyone done this?? What brand, company, and part number for the manual box? Thanks

 

[VANDAN]

I know there's a length difference between the two steering shafts, not sure which way ? I'm sure someone will verify that. I have seen an adapter, to go from short to longer, but sorry, I don't have the info or part # available...

 

[RemCharger]

Sounds like you're after one of these
Mancini Racing Manual Steering Adapter

 

[VANDAN]

Sounds like you're after one of these
Mancini Racing Manual Steering Adapter

That's it !!!

 

[skicker]

Manual boxes on B Bodies were the same from 62-72...

You will need to find a manual column as the steering shaft itself is one piece and needs to be about 3" longer...

The part referenced above will work for that...It's just a half assed way to do it...

 

[T Brashears]

I have a 65 box

 

[T Brashears]

I also have a new column end seal and possibly a bare steering shaft.

 

[Terry1213]

I have a 65 box

I removed as much play from the power box as I could and I am waiting for a pump rebuild seal kit. I'll try that first but I will keep it in mind. Thanks

 

[T Brashears]

I had to go power,shoulders can’t handle parking anymore

 

[T Brashears]

The earlier boxes use smaller diameter mounting bolts. I made bushings when I installed the borgeson box.

 

[Gerrs69rr]

I want to swap to a 24:1 stock-style manual steering box. Has anyone done this?? What brand, company, and part number for the manual box? Thanks

Has anyone used this setup from Kanter? It seems reasonable and easy enough? 1976-1980 Dodge Aspen, 1970-1974, 1978-1981 Dodge Challenger, 1966-1978 Dodge Charger and others - Steering Box - MSBOX8831A - Kanter Auto