FOR SALE 66 & 67 Charger Parts

[Mike Beaudoin]

Looking for dash lighter assembly, with the bezel, got that?

I have the female part of the assembly, but no pop out lighter.

 

[Mike Beaudoin]

Mike, I'm looking for the harmonic balancer pulley or a 383 No Air with power steering. Let me know if you think you have it thanks
DouginDetroit

Sorry no engine parts.

 

[Nxcoupe]

Brake metering block, on the inner fender/frame rail?

 

[prostockstan]

As I live in Ontario I have turned up several rusted out parts cars while restoring my 66 Charger and I now have a crap load of parts because I strip every last component off of them right down to the trip clips, I know how hard the part you need is to find. I am not looking to get rich just support my, and other's addiction for these cars. Let me know what you need and remember my US brothers get a 30% discount on the dollar.

Cheers, Mike.

Do you have a "Headlamp hold open" switch? Thanks, let me know!

 

[patrick66]

Rear bumper guards with good rubber?

 

[Potshot]

I have rust bubbles developing under my vinyl roof about in the middle of the rear. Do you have any decent sections of roof that might be cut out and used as a panel? If you do, I can measure out about the location I need. I expect that 66 and 67 roofs are the same, someone can correct me. Thanks!

 

[Virg464]

Torsion springs for the trunk lid?

 

[Nmcdonald0925]

Sorry no engine parts.

I have engine parts ...67 right?

 

[Nmcdonald0925]

Sorry no engine parts.

I have engine parts and pulley

 

[patrick66]

I have rust bubbles developing under my vinyl roof about in the middle of the rear. Do you have any decent sections of roof that might be cut out and used as a panel? If you do, I can measure out about the location I need. I expect that 66 and 67 roofs are the same, someone can correct me. Thanks!

They are the same, yes.

 

[Mike Beaudoin]

Sorry no spare roofs

 

[Mike Beaudoin]

Torsion springs for the trunk lid?

Sorry no trunk springs.

 

[Mike Beaudoin]

Rear bumper guards with good rubber?

Sorry no good rear bumpers, hard to fine around here.

 

[Mike Beaudoin]

Do you have a "Headlamp hold open" switch? Thanks, let me know!

I believe I do let me check the dash I removed.

 

[Mike Beaudoin]

I believe I do let me check the dash I removed.

Sorry it has already been sold.

 

[eoo]

Hi I’m looking for the front trim piece for front fender, w/washer reservoir and the all the console latch pieces for a 66 charger. Thanks

 

[djbr459]

As I live in Ontario I have turned up several rusted out parts cars while restoring my 66 Charger and I now have a crap load of parts because I strip every last component off of them right down to the trip clips, I know how hard the part you need is to find. I am not looking to get rich just support my, and other's addiction for these cars. Let me know what you need and remember my US brothers get a 30% discount on the dollar.

Cheers, Mike.

I'm looking for the chrome corner mouldings that goes on the gutter trim above the wing window.
Thanks

 

[Mike Beaudoin]

Sorry do not have any

 

[Mike Beaudoin]

Hi I’m looking for the front trim piece for front fender, w/washer reservoir and the all the console latch pieces for a 66 charger. Thanks

I have the long piece for the front fender but not the spear. I think I have a spare w/washer tank, will check. latch pieces I will have to check on, I know I have a full console.

 

[Yennes]

Was there a passenger outer door mirror installed?