FOR SALE 66 belvedere body trim

[doublekrossd]

I'm still pulling pieces out of storage and trying to figure out what all I have. So far I have what appears to be a full set of body trim minus the fuel cap and decorative cap on the passenger side for a 66 belvedere.
I also have a couple head light and taillight pieces, 2 grills (neither perfect but neither bad)
And a bumper, but I'm not certain if it's front or rear as my memory sucks.

I'm really not sure what to ask for the parts but I know they have value. I've come to the realization that an original car type recreation will never happen and I sold my belvedere... that being said, if your looking for parts like these, message me.

 

[Garethw]

This sounds like a 66 Belvedere II? Should you discover a gas cap in your pile, I would take it.

 

[doublekrossd]

I know for a fact there's no gas caps. That's a rare bird my friend

 

[Garethw]

I know for a fact there's no gas caps. That's a rare bird my friend

Thanks. Yeah, definitely know that. Lost mine when I was 16, left it on the trunk and drove away. Little did I know it would be so rare.

 

[RGC440]

Are you selling by the piece? If so, how much for right door mldg?

Rick Crow
53rd year in my shop.
440 with track pack from 69 R/T
11" clutch, HD 833, 3:54 Dana

 

[doublekrossd]

I would prefer to sell it as a whole lot simply so I don't have to sell individual remaining pieces

 

[RGC440]

Please let me know if you change your mind.

If you sell the set, please ask if they have a nice right door molding. They might recoup a little of their investment.

Thanks
Rick

 

[Dave P]

I'm still pulling pieces out of storage and trying to figure out what all I have. So far I have what appears to be a full set of body trim minus the fuel cap and decorative cap on the passenger side for a 66 belvedere.
I also have a couple head light and taillight pieces, 2 grills (neither perfect but neither bad)
And a bumper, but I'm not certain if it's front or rear as my memory sucks.

I'm really not sure what to ask for the parts but I know they have value. I've come to the realization that an original car type recreation will never happen and I sold my belvedere... that being said, if your looking for parts like these, message me.

Your in box is full....
Dave

 

[doublekrossd]

Sorry fixed...

 

[gtx6970]

This sounds like a 66 Belvedere II? Should you discover a gas cap in your pile, I would take it.

Popped up in my search this morning. But an NOS 1966 Belvedere gas cap is on ebay NOW.

Be sitting down when you open this

https://www.ebay.com/itm/124997028191

 

[Garethw]

Popped up in my search this morning. But an NOS 1966 Belvedere gas cap is on ebay NOW.

Be sitting down when you open this

https://www.ebay.com/itm/124997028191

Holy shi#!!!! Yeah, looks pretty nice but that price in ridiculous. Thanks for the note though.

 

[gtx6970]

Ive seen a few decent used ones over the past year. and gave it some thought to swap my plain black cap on my Satellite ,,,just to be different. But Ive never pulled the trigger on one yet.

 

[dadsbee]

Popped up in my search this morning. But an NOS 1966 Belvedere gas cap is on ebay NOW.

Be sitting down when you open this

https://www.ebay.com/itm/124997028191

Sellers name is appropriate at least...

 

[Dave6T4]

Five or six years ago, I was asked to inspect a 1966 Belvedere II with a Hemi in it to verify that it was an actual 426 car. This turned out to be a real deal Hemi car, with a December 1965 build date. It had the HP2 signs on the front fenders. I was surprised to find that all of the long trim down the side of this car were chrome plated die cast pieces, instead of stainless or anodized aluminium that I expected. This would have been considerably more expensive for Plymouth than the softer trim. Were all '66 Belvedere II like this, or was there a running change to stainless?