'66 Charger driver side quarter panel patch!!

[vintagetin]

I am in desperate need of rear quarter panel patch. It's the last 16" that runs from the pot metal end trim near the bumper to about half way into the fuel door. I need the hole height of the quarter (from the aluminum trim all the way to the bottom).

Just name your price. You'll probably have to cut it with a rotating a disk. A saw-zaw will bend the metal and a plasma cutter will probably warp it.

I'm located near Pensacola Florida, so if your in the area (a few hundred miles), I'll go to you and cut it myself.

If you have any questions I can post a picture.

Please help!

 

[vintagetin]

This picture shows the piece I need outlined in red:

 

[YY1]

Ouch. Dude, what happened?
I think you could also use that piece from a 66 or 67 Coronet.
Different at light, but looks the same on the side.

If you are desperate, try J and J in Starke.
Expensive, but will likely have what you need.

J & J Cars & Parts
Route 4, Box 65
Starke, FL 32091
(904) 964-5039

BTW, there's another 318 3 on the tree car listed on ebay....

 

[vintagetin]

I backed into one of those brick mail boxes! WHAMO!! The radio was up to loud and reached to turn it down. And I had not been drinking for any of you skeptics! I do not drive under the influence..ever. I backed out of a friends yard into the street and I guess I forgot how big my car was and how close that mail box was. The mail box was unharmed for the most part. This side was already a little messed up anyway..you can see the bent metal and bondo. I had some trouble trying to reform all the shapes before I put some paint on it. I guess this just give me an opportunity to fix it the right way now.

 

[YY1]

Jerry at J&J had about a dozen or more 66/67 Chargers and Coronets last time I was there, but that was about 5 years ago.

 

[Dodge33]

PM sent

 

[slschenk]

Classic 2 Current Fabrication. I just bought a right side qtr. panel patch for my '67 Charger.

 

[YY1]

Let us know how that works out.
I bought their rockers for my 73/74 cars because they were cheap.
I don't even know if I'll need them.

They look hand (brake?) formed, but a really good job.
Might be easy to do on rockers, but a lot more difficult I bet on a quarter.