66 Coronet Ignition Switch Problem ??

[coronet-flyer]

I have a 66 Coronet with stock MOPAR electronic ignition and I am experiencing the following conditions:
-1- When the ignition switch is in the On position I have a steady 12V to the coil.
-2- When starting and the engine is turning over I have intermittent 12V to the coil.
-3- While holding the key in Start position; if I allow the key to move just a fraction back
towards the On position the engine will start.
Do the above conditions indicate a ignition switch problem or could there be other problem(s)?

I have some experience with other manufacturers 60's & 70's cars but this is my first MOPAR
~Please Help~

 

[coronet-flyer]

I have a 66 Coronet with stock MOPAR electronic ignition and I am experiencing the following conditions:
-1- When the ignition switch is in the On position I have a steady 12V to the coil.
-2- When starting and the engine is turning over I have intermittent 12V to the coil.
-3- While holding the key in Start position; if I allow the key to move just a fraction back
towards the On position the engine will start.
Do the above conditions indicate a ignition switch problem or could there be other problem(s)?

I have some experience with other manufacturers 60's & 70's cars but this is my first MOPAR
~Please Help~

Sorry duplicated my post. please disregard

 

[Moparnocar]

Is this off the back of the switch? Mopar bulkheads are known to burn up and cause issues