66 Satellite - Does this wiring harness look familiar?

[Bleep Bleep]

C pillar lights not working. Then I saw these disconnected leads in the trunk running toward the c pillar area and wonder if that’s what they are for? If not, what are they for?

What wiring is needed to complete in either event.

 

[Bleep Bleep]

Brake , running and signal lights are functional.

 

[AR67GTX]

Probably the C-pillar lights. They plug into the trunk harness on the driver side and run under the package tray.

 

[Bleep Bleep]

Probably the C-pillar lights. They plug into the trunk harness on the driver side and run under the package tray.

Ok good. I’m not familiar with the term package tray?

 

[Jerry Hall]

Package Tray, the area between the back seat top edge and the rear glass.

 

[Bleep Bleep]

Package Tray, the area between the back seat top edge and the rear glass.

thanks!

 

[devinism]

Package Tray, the area between the back seat top edge and the rear glass.

As kids that was the "preferred seating area" in our 1952 Plymouth.

 

[Bleep Bleep]

As kids that was the "preferred seating area" in our 1952 Plymouth.

Ahhh, yes. Back in the day of flexibility!

 

[64BEL]

As kids that was the "preferred seating area" in our 1952 Plymouth.

Also the area where the dog with the nodding head rode.

 

[eldubb440]

I've never seen anyone put packages there

 

[eldubb440]

but I have seen many a Jensen Triaxle

 

[autoxcuda]

I'll look for more. Connector at upper right of pic.

 

[Bleep Bleep]

I'll look for more. Connector at upper right of pic.

View attachment 1817636

That’s the place. Drivers side trunk harness. One wire splits off from the rear light harness there and runs across underneath the window and connects to a wire lead running out from the passenger side rear wheel well (I assume that then runs up to the passenger c-pillar light?)

If that’s where that passenger side wiring goes, then I’m looking for a similar lead out from the drivers c-pillar I guess that goes to the open connector in the picture?

Anyone know if I have that correct, and then where to look for the wire leading down from the drivers c-pillar?