• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

67 belvedere II Wagon Caltrac install

cudatom

Well-Known Member
Local time
11:56 AM
Joined
Sep 11, 2013
Messages
229
Reaction score
279
Location
Massillon , Oh
So I start putting the dana and caltracs in my wagon and ran into a problem. The old rear shackles broke during removal of the 8 3/4.
The original rear hanger does not bolt directly to the rear rail but actually off the the side. The rear shackle is offset inboard. The problem I have is I cant find anything but straight rear shackles for this car. The rear shackle for this car has a 1.25" offset. The largest offset I have found was .80 for an ebody.
Was wondering if anyone has any ideas.
Thanks
 

Attachments

  • 67 Wagon Shackle.jpg
    67 Wagon Shackle.jpg
    48.4 KB · Views: 373
fix what ya have! Knock the pins out and put grade eight bolts in!! fixed!!!
 
Just got done knocking them out. Was hoping to go back w/pins but since they are only available for the shorter length pin, bolts it will be.
Thanks
 
Auto Transport Service
Back
Top