67 coronet kick down

[cptk3rk]

I have 67 coronet 440 automatic, i have no kick down lever for the 727, i'm wondering if i could modify a GM style kick down cable to work with it, have any of you guys done this? finding the right linkage looks like a head ache

 

[R413]

Choose your preferred headache. You can make anything work.
Many folks have parts bins with these levers and such.

 

[lemondana]

If using the mechanical stock type linkage. You have to use the 3 pc bellcrank system. The one rod system will not work

 

[493 Mike]

Lots of fellas using the Lokar cable system.
Mike

 

[ckessel]

Check in with Mancini or A&A Trans. I bought the missing bell cranks and KD arm for the trans from them[ Mancini]. Kerndog hooked me up with the rods and adjusters. Also I bought the manifold bracket that AR Engineering makes for my Edlebrock manifold, from Mancini too. Now I have stuff that works. The PO put on some generic cable units on my car for the accelerator and KD. Neither worked worth a damn. Word is that the Bouchillon cable setup works like a charm for the KD. I went oe and lower dollar.

 

[cptk3rk]

thanks guys all this info very helpful

 

[Billccm]

The Bouchillion system is idiot proof. Expensive and worth every penny.

 

[cptk3rk]

just read a review on bouchillion system looks like im goin with it thanks for that