68-70 original exhaust tips?

[Yennes]

Hi fbbo

Can someone tell me from the pictures if these are original for a 68 charger RT?

They are chromed, not stainless steel.

 

[gooser]

they look like the ones that were on my 69 charger rt

 

[Richard Cranium]

they look like the ones that were on my 69 charger rt

With the exception of the hole drilled into the hanger.

 

[1969 Hemi RTs]

hard to tell in the pics, the originals would have the mounting bracket (L bracket) inserted thru a slot in the tip and spot welded together. these could have been welded at some point. who knows at this point?

 

[Yennes]

hard to tell in the pics, the originals would have the mounting bracket (L bracket) inserted thru a slot in the tip and spot welded together. these could have been welded at some point. who knows at this point?

I will check that

 

[mrhemi]

Those appear to be originals, other than the weld on the bracket. I have an NOS set, but I am not at home to open the boxes and photograph. The originals are chrome plated steel, NOT stainless. I purchased these over 40 years from the Dodge dealer, so the "provenance" is genuine.

 

[Yennes]

Those appear to be originals, other than the weld on the bracket. I have an NOS set, but I am not at home to open the boxes and photograph. The originals are chrome plated steel, NOT stainless. I purchased these over 40 years from the Dodge dealer, so the "provenance" is genuine.

Would be nice if you can share pictures of them. Can you measure the length and post it?

 

[mrhemi]

Would be nice if you can share pictures of them. Can you measure the length and post it?

As I said in my previous post, I am away from home for a bit. I may be able to get some photos in 2-3 weeks.

 

[lewtot184]

Originals are chrome and made for 2 1/4" pipes.

 

[Yennes]

Originals are chrome and made for 2 1/4" pipes.

Not 2 1/2"?

 

[QuickBpBp]

Maybe it's my old eyes but it looks like the part of the tip that connects to the tail pipe has been cut-off and a new larger pipe was welded on????

 

[lewtot184]

No 2 1/2's. Original tailpipes were 2 1/4.

 

[Yennes]

Maybe it's my old eyes but it looks like the part of the tip that connects to the tail pipe has been cut-off and a new larger pipe was welded on????

Des could be. The chorme ends there aswell, what I think should not.