69 brake warning switch not illuminating

[69 R/T]

I'm having problems with my brake warning light indicator. When I depress the parking brake pedal it does not illuminate. I've checked the bulb, and the bulb is good.
What's the easiest approach to check this? Since I have a four-speed car, this is a concern to me as I may forget to pull off the parking brake and drive with it on. Sometimes you got a lot of things going on in your head and you may miss something.

 

[radical rob]

It’s a switch on the parking brake assembly. Either switch is bad or ground, check and see if wire got pinched somewhere

 

[Nacho-RT74]

The light switches on by ground while positive is constant. Parking brake switch coud be simply disconnected.

The brake fluid distributor also lights on that light on a brake fluid pressure failure. You could ground that wire too to check if light works and confirm is a switch wire failure or positive.

 

[69 R/T]

I found the problem. I removed the kick panel and the switch is missing the guts, it fell out and the wire is hanging there. A Duralast SW101 switch looks like it may be a direct replacement, and AutoZone has it for $6.99