70 Charger resto project

[Steve Frederick]

Hi everyone
I'm a newbie here but a lifelong dream was to restore a 69 or 70 charger. I'm getting my wish...and am now knee deep. Looks like I'll need a hood, rear RH full quarter , and lh quarter patch, and a few other metal patches ( not bad)
My question is , I think 69 and 70 rear quarters are the same, but clearly the hood is different. Everything seems to be readily available, except the hood. Any thoughts? I've looked high and low
Thank you!

 

[dual fours]

Hello from Pa. and welcome to FBBO. How far along are you? Maybe somebody will start making '70 hoods by the time you get closer to that point when you need it. This is a very good place to ask for recommendations. We like pictures. Have you been here, all '70's? http://1970chargerregistry.com/

 

[wish4hemi]

AMD is all you need. http://www.autometaldirect.com/

 

[dual fours]

AMD is all you need. http://www.autometaldirect.com/

Is ADM making '70 Charger hoods?

 

[polywideblock]

g'day from Australia

 

[JB400]

Welcome to the forum.

Unfortunately, you're stuck looking for used unobtanium 70 hoods, unless you don't mind fiberglass. Used ones show up time to time, but usually come with a price. Fix yours if possible.

70 quarters are different than 69's, but are being reproduced. Fenders and hoods are different as well as tail light trim.

You might want to check on DodgeCharger.com as well.

 

[Rick Carson]

Welcome from Canada,70 qtrs. have different side marker holes than a 69,other than that no issues.70 hood, amd, no go

 

[68sprtsat383]

Welcome

 

[Car Nut]

aboard!

 

[Budnicks]

good luck with the 70 Charger project

Welcome to FBBO from hot, dry & sunny NorCal Sierras

 

[7t500]

Good luck and let's see some pics!

I happen to have a spare '70 Charger hood I would part with...

 

[Ironbuilt]

Welcome from North Carolina.

 

[BDF6]

Hello from California!