70 Convt. Windshield Trim Clips

[PurpleBeeper]

My windshield needs to be re-sealed (water running in on my feet & I've already replaced the wiper pivot seals). While I have the windshield out, I'd like to replace two or three of the little clips, along the cowl just under the windshield, that hold the lower windshield trim in place. I can see a couple have rusted away, and it looks like you have to remove the windshield to replace them, so this would be the time.

This is a convertible.

Am I looking at the correct clips to buy or do I need something else? This is the picture off the RT Specialties site. The Classic Industries looks the same but includes screws.

http://www.classicindustries.com/product/mopar/b-body-road-runner/parts/mb1161.html
http://www.rtspecialties.net/proddetail.asp?prod=1000040A

 

[PurpleBeeper]

Anybody????

 

[Mr. Belvedere II]

Those look like the same kind of clips I got for my 67 hardtop. Call up CI and see if they work for convertible. I would think they do. Those are indeed windshield trim clips though, no doubt about that! They worked fine for me.

 

[meskip]

Do the long ones or short ones go along the bottom at the cowl?