• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

70 roadrunner rough project

Status
Not open for further replies.

734406cuda

Active Member
Local time
2:29 PM
Joined
Feb 17, 2012
Messages
40
Reaction score
1
Location
oklahoma
Feedback: 0 / 0 / 0
Contact seller
originally 383 4 spd now no motor or tranny needs floors trunk and lower qtrs no interior has ralley gagues originally b-5 blue with black interior vin tag fender tag and radiator support match no title 2k obo i have a few pictures on this computer but can get more on the weekend
 

Attachments

  • 70rr.jpg
    70rr.jpg
    14.1 KB · Views: 1,435
  • 10188028485_y_0_136x136.jpg
    10188028485_y_0_136x136.jpg
    7.4 KB · Views: 1,426
i also have a grille front bumper ralley gauges auto colum thats not installed im going to get pictures this weekend didnt get a chance to last time i was down there the rear end is just a roller 8 3/4 its been on the back burner for about 5 years would do a cash plus trade honda rebel project cuda parts etc
 
didnt get to take any pics of the inside too much stuff in it will clean it out next weekend and get some more pictures
 

Attachments

  • vin.jpg
    vin.jpg
    74.7 KB · Views: 1,152
  • fender tag.jpg
    fender tag.jpg
    77.5 KB · Views: 1,154
  • rrtrunk2.jpg
    rrtrunk2.jpg
    99 KB · Views: 1,160
  • drv qtr.jpg
    drv qtr.jpg
    93.5 KB · Views: 1,137
  • engine bay.jpg
    engine bay.jpg
    97.3 KB · Views: 1,162
  • tail.jpg
    tail.jpg
    101.7 KB · Views: 1,104
  • rear.jpg
    rear.jpg
    94.2 KB · Views: 1,139
  • rrtrunk.jpg
    rrtrunk.jpg
    102.6 KB · Views: 1,147
  • rr1.jpg
    rr1.jpg
    94.4 KB · Views: 1,141
  • pass qtr.jpg
    pass qtr.jpg
    105.8 KB · Views: 1,140
didnt get my stuff out but i took a few shots of the floors to show the floors need replaced im going to get pics of the rally dash interior panels etc
 

Attachments

  • 70rrinside.jpg
    70rrinside.jpg
    84.7 KB · Views: 985
  • 70rrinside1.jpg
    70rrinside1.jpg
    78.6 KB · Views: 967
  • 70rrinside2.jpg
    70rrinside2.jpg
    78.1 KB · Views: 972
wouldnt by chance have a jack hook by chance.
four one seven six one nine two six nine nine thanks for looking
 
some other stuff id be interested in trading 70-74 cuda parts im needing radiator support and inner fenders 4 spd trans and drive shaft rear bumper brackets hood pin bractets pins clips ive got a 70 non-hp 383 out of a spot sat that needs rebuilt has scaleing in 1 cylender is a virgin block might clean up at .040 or might need a sleeve with 906 heads and a 69 intake ill let go with the car
 
would you go down on price any and do you have the bill of sale?thanks
 
Hahahaha... this project is right up my alley !
 
Status
Not open for further replies.
Auto Transport Service
Back
Top