WTB 727 kick down rod

[3x2bee]

Hi, I was looking for a piece of kick down linkage for a 1970 Coronet with a 383 and 727. It's the rod that goes from the lower bell crank on the side of the bell housing up vertically to the bell crank at the rear of the intake manifold. I believe this piece is the same on all B, E and C body cars with the 440, 383/4bl and 383/2bl with a 727. 1968 and 69 model years may work as well. I included a couple pictures of the rod I am looking for. Thxs

 

[oldkimmer]

I have the 68s that are not adjustable. Their 14 inches long. I also have the adjustable ones. There around 13 1/2 inches long. Kim

 

[3x2bee]

Still looking...

 

[oldkimmer]

I have these. Kim

 

[3x2bee]

Kim, Thanks for the reply, unfortunately I don't see a copy of my part. I know it's hard to tell from the pics I posted, but when comparing the actual part to those in your pics I can't find a match. Thxs again.

 

[oldkimmer]

No problem

 

[3x2bee]

TTT