FOUND 727 Torqueflite Transmission Miller Bushing Tools

[64RedBelvedere]

I'm looking for some Miller tools as shown in the factory service manual for replacing the bushings in my 727 torqueflite transmission. Looking for part # SP-3549 driver handle, extractor cup part# SP-3633, extractor SP-3630. Thanks

 

[pnora]

I'm looking for some Miller tools as shown in the factory service manual for replacing the bushings in my 727 torqueflite transmission. Looking for part # SP-3549 driver handle, extractor cup part# SP-3633, extractors SP-3630 & SP-5301 and installer SP-5118. Thanks

I have the complete kit in the steel box. Nice shape some not used.

 

[64RedBelvedere]

I already have a few of the tools, but can you let me know what you would need for your kit. Thanks

 

[Lefty71]

Tough to find....but keep searching those numbers on Ebay and eventually a tool liquidator will put them up.... that's how i got mine.

Some of them are pretty basic stuff....maybe quicker and easier to have a shop make them for you, but you'd need to borrow the measurements from somebody.

 

[Dave6T4]

I was lucky in that the factory I worked at had an in-house tool room. I had my bushing drivers made for me on the QT by one of the tool makers.