74 Roadrunner Spark plug wire routing

[FoxRunner]

Hi there, new to this Forum and looking for advice on the factory routing and factory brackets for spark plug wire routing. 74 Roadrunner, 400, NON-AC car. I’ve found a few pictures on the web and this forum of a couple of the brackets but looking for more pictures if anybody has any.
I’m trying to return my runner to a “ factory look” I’ve relocated the MSD behind the glove box and have hidden the auxiliary fuse block behind the factory ignition control module.
Thanks in advance.

 

[mopar 3 B]

Wires decend around front of head and back. With headers the factory routing will not work.
Thats an awful lot of wire there.

 

[Nacho-RT74]

https://www.forbbodiesonly.com/moparforum/threads/spark-plug-wire-routing.137176/#post-910759000

https://www.e-bodies.org/resources/...k-plug-wire-bracket-looms-installation-guide/

Mixing those two links will help you out on figure it out

 

[FoxRunner]

Wires decend around front of head and back. With headers the factory routing will not work.
Thats an awful lot of wire there.

Well after a few weeks of searching I have not been able to find any factory wire separators but I’ve come up with the next best thing. I think its come a long way from where it started.

 

[FoxRunner]

 

[Nacho-RT74]

My friend, bracket kits are available ALL AROUND! The ONLY one not available is the one at driver side valve cover bolt, but plastic piece is

 

[mopar 3 B]

Well after a few weeks of searching I have not been able to find any factory wire separators but I’ve come up with the next best thing. I think its come a long way from where it started.

Looking good. No more unruly mess.

 

[rlem1977]

Check out R&M Specialties at Summit for Mopar B blocks.