8 x 2 manifold for a 392 Hemi

[speedchangesyou]

Looking to buy a 8x2 manifold for a 392 Hemi any help would be appreciated.

Chuck Merken
951.805.8668

 

[69Bee]

Try this link:

http://hothemiheads.com/

ps.. They are going to edit you PH# out. You can only PM numbers and email addresses.

 

[8stackhemi]

Chuck, are you changing up the Hemi??? Scott

 

[Photon440]

I've seen 4 X 2 manifolds and even 6 X 2 manifolds but never a 8 X 2 intake - I'd imagine the linkage would be quite the interesting contraption.

 

[DennisH]

http://www.ebay.com/itm/Chrysler-He...Parts_Accessories&hash=item418a483bf4&vxp=mtr

Fire up the welder and go at it.

Dennis

 

[speedchangesyou]

Hi Scott:
We have another Hemi car that I want to change out the dual quads on to run 8 x 2 but for now were going to settle on 6 x 2 Holley's just cant seem to find an old school manifold and don't want to use a kit........I will send you some photos

 

[Cranky]

This should be in the classifieds in the wanted section and yeah, phone numbers and emails are not allowed in ads and for a good reason. There's always someone trolling internet sites looking for emails and phone numbesr that they can scam and spam. That rule is meant to protect the members from that.

 

[Photon440]

This should be in the classifieds in the wanted section and yeah, phone numbers and emails are not allowed in ads and for a good reason. There's always someone trolling internet sites looking for emails and phone numbesr that they can scam and spam. That rule is meant to protect the members from that.

Perhaps we should start a forum filled with nothing but fake emails and 555 numbers to clog up the harvester bots and server farms.

 

[speedchangesyou]

Guys, appreciate all the feedback and help....I found one seller on Ebay that just sold one a few months back for 900+.

If anyone has one I am willing to pay 1,000 plus throw in my 6 x 2 Weiand Drag Star Log fully polished along with my Weiand Dual Quad manifold with 2 Edlebrock 650cfm in as new condition....

 

[dryheat]

Something like this one?

https://www.google.com/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0CAcQjRw&url=http%3A%2F%2Fwww.jalopyjournal.com%2Fforum%2Fthreads%2Fwhere-to-get-8x2-hemi-intake.813795%2F&ei=C-N8VP_DNYTfoATok4CQAg&bvm=bv.80642063,d.cGU&psig=AFQjCNGaLxvaTJzyLAGaKs0haaFlwFUMfA&ust=1417557060929666

 

[speedchangesyou]

That would work....

 

[Budnicks]

IMHFO it'd be relatively easy to make a top,
a good fab guy & a mill could whip that out fast,
if you can get a base for a tunnel ram with a flat top style open plenum
or a bathtub or cross ram style manifold,
like the Indy style or Edelbrock STR, Rat-roaster
I'm not sure if they ever made the latter few for an early/392/Hemi

good luck

 

[speedchangesyou]

Budnicks, thanks for the information...will keep you posted