A-pillar weather strip holder

[Sam69sat]

Does anyone have a photo and know the name of the piece that holds the weather strip seal on the a-pillar of a 67 coronet hardtop? I think it's a piece of channel that holds the seal but correct me if i'm wrong. Thanks for any help.

 

[dadsbee]

"Roof Rail"

 

[Sam69sat]

"Roof Rail"

Ok thanks. Is that a two piece roof rail on a coronet? One piece at the a-pillar and another long dog leg piece that goes along the top and down the back side window?

 

[dadsbee]

Not sure how a '67 is all put together, but I would imagine its A pillar, joiner and one long piece A to C.

 

[69bfan]

As Wayne described, the roof rail seal is one continuous piece of extrusion. There is different profiles for the extrusion for the molded ends and corners, but it all is held in place by pushing it up into the stainless retainer. Hope that makes sense.

 

[dadsbee]

I believe he is actually in need of the stainless channel Richard.

 

[69bfan]

If he does need the stainless channel, I believe that any of the 66 and 67 Dodge and Plymouth B-Body hardtops with the exception of the Chargers will be the same. They are not reproduce, so it will have to be a good used piece.

 

[Sam69sat]

Thanks for all the info. I'll have to post something in WTB

 

[69bfan]

@Sam69sat, you might be able to source one from Wild Cat Auto Salvage out of Sandy, OR.

 

[Sam69sat]

@Sam69sat, you might be able to source one from Wild Cat Auto Salvage out of Sandy, OR.

Good idea. I'm gonna contact them. Thanks!