• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

adding ac to my 73 charger

Texas charger 73

Well-Known Member
Local time
6:38 AM
Joined
Feb 23, 2014
Messages
602
Reaction score
296
Location
Texas
i have a 1973 Dodge Charger Small block.. it was a factory ac car.. I'm adding back in an under hood kit from Bouchillion performance... i have compressor and condenser mounted , but i think im going to flip the condenser.. I'm down to running lines and putting in the expansion valve and the thermostat switch... Does anyone have photos of there ac lines i can figure out how i want to lay mine out before crimping... thank you much...

also has anyone found a replacement blower motor that blows any harder than the factory ones?
 
20240331_124626.jpg
20240331_124435.jpg
20240330_164009.jpg
 
I have a 72 big block 440 with factory AC, not sure if it is at all the same? Let me know what you think and I'll get some pictures of the AC system.

20231016_184411[1].jpg
 
Hi, just doing some reading and see you would like pictures. I have a 440, but the most part you came lay out the hose any way that makes them look organized. Here’s my 73 Charger

D0D6B29A-B863-4B6F-90A6-2DA4D5E3A1E0.jpeg
 
This is my own design for the system, but it might give you an idea on layout. Make sure you have enough clipping points if you are running hard lines- mine cracked at a brazed joint and I am going to have to repair it before the summer.
20200320_215121.jpg
11_Engine.jpg
 
you would need an electric fuel pump for this way but neat install

myac2.jpg


myac4.jpg


myac3.jpg


myac1.jpg
 
Install is done. Ac pulls down to almost 42°. It's awesome and I love it. Best thing I ever did.
20240414_195756.jpg
20240406_173720.jpg
20240406_173718.jpg
20240406_173715.jpg
20240406_173706.jpg
20240406_173703.jpg
 
Auto Transport Service
Back
Top