tommytunes
Well-Known Member
Guys
What is the paint color (gray) code for the air grabber 1969 Plymouth roadrunner?
What is the paint color (gray) code for the air grabber 1969 Plymouth roadrunner?
air grabber paint color
- Thread starter tommytunes
- Start date
topside
Well-Known Member
The color was in the resin, kind of a charcoal, not quite black; on originals you can see some of the fiberglass strands.
Metal flaps were black, and the hardware was natural & what looks like clear zinc.
Best to clean the hell out of the ductwork and then shoot a semi-gloss clear over the surface.
If that won't work for your situation - say, in the case of repairs - a dark charcoal/almost black is about as close as you'll get.
Here's a couple photos of my 17,000-mile original RR for reference.
Metal flaps were black, and the hardware was natural & what looks like clear zinc.
Best to clean the hell out of the ductwork and then shoot a semi-gloss clear over the surface.
If that won't work for your situation - say, in the case of repairs - a dark charcoal/almost black is about as close as you'll get.
Here's a couple photos of my 17,000-mile original RR for reference.
- Local time
- 2:52 PM
- Joined
- Jan 29, 2018
- Messages
- 21,214
- Reaction score
- 74,315
- Location
- Midland Ontario, Canada
"Gray".. not sure what you think is gray. Here's what I used to restore mine after a complete rebuild and about as close as you'll get to OE. All covered in my Bee restoration... that's a sticky in the restoration section. It is not Black like most think and paint them!
Last edited:
That looks really good!
Here's an unrestored original, they are definitely not black...
69 hemibee
Well-Known Member
Here are a few pictures of mine after restoration from Airgrabber Restoration.
Similar threads
