Any pics of b body with 18” or bigger wheels ?

[Torkmnstr]

These are my 18” rollers. Final rims are still up in the air…

 

[67belvodere]

Torkmnstr, what wheels are these from and what are the specs? Did you need a spacer? Thanks, Chris

 

[33 IMP]

Torkmnstr, what wheels are these from and what are the specs? Did you need a spacer? Thanks, Chris

A guess on my part, but those look like late model cop car wheels. If so, they are not quite the right bolt pattern. Notice he has only two lugs on per wheel.
I wouldn't use them on a 4 1/2 pattern.

 

[Garethw]

View attachment 1078402 View attachment 1078403

18's. Handles like a modern car. Rides great too.

@JoePole What wheels are those?

 

[JoePole]

@JoePole What wheels are those?

BOSS 338 GREY 18x8 front & 18x9.5 rear.

 

[jamey]

This is my 67 satellite with a 275/40/18 on an 18x9 weld wheel. Fits with no cutting.

 

[Kern Dog]

That is some precise fitment there !

I had to edit this...dang phone autocorrected and I couldn't see the mistake.

 

[Pawpaw68]

I found a few threads but they’re older so I was looking for something a bit more recent.
I’m thinking of going 18/18 or 18/19 maybe even 19/20. Thanks and ideally a 1970 gtx, roadrunner, satellite or Belvedere

here’s the car
View attachment 1074877

 

[Pawpaw68]

I found a few threads but they’re older so I was looking for something a bit more recent.
I’m thinking of going 18/18 or 18/19 maybe even 19/20. Thanks and ideally a 1970 gtx, roadrunner, satellite or Belvedere

here’s the car
View attachment 1074877

 

[DGE330/NC]

This is my 67 satellite with a 275/40/18 on an 18x9 weld wheel. Fits with no cutting.View attachment 1249978 View attachment 1249977 View attachment 1249976

sweet ride !!!!!

 

[Pawpaw68]

sweet ride !!!!!

Very nice. My rears are 295 R45 18. Fronts are 17s. I like your car

 

[Runner 68]

Very nice. My rears are 295 R45 18. Fronts are 17s. I like your car

Sorry if I missed it if you posted above Paw but what rim and tire size are you running on the front?

 

[DGE330/NC]

This is my 67 satellite with a 275/40/18 on an 18x9 weld wheel. Fits with no cutting.View attachment 1249978 View attachment 1249977 View attachment 1249976

nice ride !!

 

[DGE330/NC]

This is my 67 satellite with a 275/40/18 on an 18x9 weld wheel. Fits with no cutting.View attachment 1249978 View attachment 1249977 View attachment 1249976

My 67 Satellite with 275/40/18's

Hope to be finishing mine up this year,lots of metal replacement still going on. Sitting high because trunk floor and rear tail panel is out for replacement.

 

[jamey]

My 67 Satellite with 275/40/18's

Hope to be finishing mine up this year,lots of metal replacement still going on. Sitting high because trunk floor and rear tail panel is out for replacement.

View attachment 1252432 View attachment 1252433

Sweet!!! Cool car too! I almost went with the same wheels as you.

 

[Pawpaw68]

Sorry if I missed it if you posted above Paw but what rim and tire size are you running on the front?

Rear 18x9.5
Front 17x8

 

[Runner 68]

Rear 18x9.5
Front 17x8

View attachment 1254936

Tire size on front?
How close are you in the rear height wise to the inner fender?
Stock tubs I assume.

The reason for so many questions is that you have almost the same identical configuration that I'm about ready to pull the trigger on, on my 68.

Love the stance on your car.

 

[Pawpaw68]

Tire size on front?
How close are you in the rear height wise to the inner fender?
Stock tubs I assume.

The reason for so many questions is that you have almost the same identical configuration that I'm about ready to pull the trigger on, on my 68.

Love the stance on your car.

1” inside and out. I’ll look back at paperwork to see what the backspacing is but I’m thinking it was 4 1/2”. I had seen where others had used 10” wide but I didn’t want the risk.

 

[Runner 68]

1” inside and out. I’ll look back at paperwork to see what the backspacing is but I’m thinking it was 4 1/2”. I had seen where others had used 10” wide but I didn’t want the risk.

Not to be a PITA but I didn't ask about the BS. I'm building the diff to the width between the rims of my choice. Not worried about that.

My questions were - 1. What size "tires" are you running in front and - 2. Roughly how much clearance do you have from the "top" of your rear tires to inner fender well. I don't care about inside and outside, I have that covered.

I'm dropping mine 1- 1.5" in the rear and was considering 285/40/18s in rear but like the look of your 295/45/18s however they are an inch taller. How much clearance do you have at the "top" with your 295/45/18s?

Thanks in advance.

 

[Pawpaw68]

I

Not to be a PITA but I didn't ask about the BS. I'm building the diff to the width between the rims of my choice. Not worried about that.

My questions were - 1. What size "tires" are you running in front and - 2. Roughly how much clearance do you have from the "top" of your rear tires to inner fender well. I don't care about inside and outside, I have that covered.

I'm dropping mine 1- 1.5" in the rear and was considering 285/40/18s in rear but like the look of your 295/45/18s however they are an inch taller. How much clearance do you have at the "top" with your 295/45/18s?

Thanks in advance.

Honestly I haven’t driven it since changing the wheels and tires. It still at the shop being finished. I’ll try to look for you. I didn’t even think of them hitting the top but I will. Heck. I am considering a 1” drop also.