Anybody have a lead on these nylon nuts?

[2059]

These are the inserts that push into the nose of the fender for the outer set of headlamp bezels on the '64 Dodge and maybe more years. They get very brittle and I would like to install new/remanufactured if anybody has a lead. I have some coming for competing brands that are close enough to work, but I'd rather have the orig. style. Just a detail; but important to me.

Thanks in advance for any help...

 

[5.7 hemi]

Have ya tried rtspecialties.com?

 

[Cranky]

Might try doing a Google search. I have a catalog in the house (in out in the shop) that has a lot of stuff but I can't remember the name off hand. These places turned up after a simple search..might have it, might not. http://www.alliance-express.com/plastic-panel-fasteners?gclid=CNyI0fD73LcCFe3m7Aodi34Auw

http://www.mscdirect.com/browse/Fas...ts+and+bolts_b_24430318504_c_S&navid=12101660

I think my catalog is from MSC....

 

[moparmarkk]

Stevens performance has them,bit pricey,mark

 

[abloch]

try http://www.restorationspecialties.com/

 

[cudajunction]

Mr gs has a nice selection of that type of stuff.

 

[64HEMI330SEDAN]

Stevens performance has them,bit pricey,mark

lol! not tryin to sound like a smart azz but at this point into his resto im thinkin the price of those will not be a problem.and stevens is a good place to get them.

 

[2059]

Ya i have their cataloge. no luck.

Have ya tried rtspecialties.com?

- - - Updated - - -

Didn't see them listed but sent an email with a picture. Thanks for the lead.

Stevens performance has them,bit pricey,mark

- - - Updated - - -

Will look into their stuff when I get a little more time. Thanks.

Mr gs has a nice selection of that type of stuff.

- - - Updated - - -

Lol!! Very true!!

lol! not tryin to sound like a smart azz but at this point into his resto im thinkin the price of those will not be a problem.and stevens is a good place to get them.

 

[rsd859]

I need a few of them too!

 

[2059]

when i find them i'll let you know.

I need a few of them too!

 

[Dodge 330]

Haven't looked but Au-ve-co has almost any automotive fastener.

 

[2059]

Good lead. There is a site called clipsandfasteners.com that is a division of Au-ve-co that I ordered a small quantity of four different fasteners that might work. However, they didntt have the exact replacement. I did get an email from Ted at Stevens Perf. asking for a few more dimensions. I sent him those this morning, we'll see how close they get.

Haven't looked but Au-ve-co has almost any automotive fastener.

 

[2059]

for those that care; looks like this is where it's gonna land. i haven't heard back from Stevens Perf. yet...

Au-Ve-co P/N 21575...

 

[Dodge 330]

Cool!

 

[RedHot67]

Here is another source, just need to cut the length, thats what I did:

http://www.ebay.com/itm/MOPAR-1961-...Parts_Accessories&hash=item519d604822&vxp=mtr

Dan

 

[2059]

BINGO!! thanks for the lead!!

Here is another source, just need to cut the length, thats what I did:

http://www.ebay.com/itm/MOPAR-1961-...Parts_Accessories&hash=item519d604822&vxp=mtr

Dan

 

[gottagettamopar]

These look similar to your picture although listed for Cuda.
http://www.rtspecialties.net/proddetail.asp?prod=1000537

- - - Updated - - -

http://www.rtspecialties.net/proddetail.asp?prod=1000537


Just checking previous link, it dropped some characters.

 

[2059]

Great lead! Thanks GGM.

 

[71airgrabberRR]

There is a company called J&T fasteners that make a lot of replacement factory chrome clips, headlight adjuster screws etc. I am pretty sure that i have used the exact same part you are looking for on my Dusters grill. I have the catalog at home, but I'm at work now. You can try searching on the Internet for the company to see if the catalog is available. If no luck, I'll try looking in my book when I get home in the am. Hope this helps. Our local NAPA store also carries a small line of similar clips too.

 

[71airgrabberRR]

J & T catalog

Here are a few pictures that show the catalog I mentioned earlier along with the part number that I am pretty sure will work for you. I hope this helps you on your parts quest.

- - - Updated - - -

Look at part # 0631