SOLD big block parts

[mopar mafia]

Pair of closed chamber 516 heads ported by Gerald Geary in Louisville, Ky. 2.14 1.81 stainless valves, titanium retainers, .600 lift springs for hydraulic. bronze guides. flow is 272 @ .600 lift. they have less than 300 miles since done. 800.00 firm plus shipping. shipping is around 85.00 for the pair to most places.

Pair of 906 heads also done by Gerald that flow 296 @ .500 lift. 2.14 1.81 stainless valves.they are set up for .600 solid cam and have not been ran since done. 1000.00

Also a friend has a 383 short block with very little run time that is .030 over with trw dome pistons, .650 solid cam and lifters, double roller timing set with high volume oil pump for 1500

 

[nospin]

can you send pic of heads to? Do Not Post email addresses or Phone Numbers in posts no welding??????

 

[mopar mafia]

can you send pic of heads to? Do Not Post email addresses or Phone Numbers in posts no welding??????

no welding done on heads and pics sent

 

[mopar mafia]

Still have both sets of heads and will take 1300 for the 383

 

[mopar mafia]

906 heads are sold. still have the 516 ported heads and the 383 shortblock

 

[mopar mafia]

- - - Updated - - -