• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB brake booster for a 69 Charger

Status
Not open for further replies.
S

Stucat

Well-Known Member
Local time
3:53 AM
Joined
Oct 6, 2021
Messages
401
Reaction score
108
Location
02915
Feedback: 2 / 0 / 0
looking for a correct brake booster for a 69 Charger, need a master cylinder also? Thanks
 
Disc? Or Drum?

If Disc Doc Diff has reproductions that look correct & have been reported to work.... Originals are getting hard to find..
 
Yep-disc uses the Cadillac-the Bendix Dual Diaphragm and the drum uses the Midland single diaphragm.
 
That one on ebay how can you tell if it's single or dual. Bolt pattern firewall side? I have this one needs a rebuild.
IMG_1754.JPG
 
Rebuild what you have. The C body unit uses different linkage. You have to have it apart to change them. Is yours a B or C body unit. I think that MBM has the linkage but they might not sell it without buying one of their Chinese reproductions. And I think the Ramman will put the correct stuff in it. I know-a lot of people don't like Wayne, but he knows his Mopar brakes. Call Booster Dewey or Harmon Brakes and get the information from them. I had Harmon rebuild a dual diaphragm A Body Midland and it is beautiful, it looks better than new.
 
Disc front Drum rear. So the repos work? OK?
 
Stucat said:
Disc front Drum rear. So the repos work? OK?
Click to expand...
@Kern Dog bought one & it's been great... There have been others that have also had good luck... I'm always skeptical of aftermarket stuff, so much junk out there especially those CPP brake boosters.. But from the feedback I've seen if I needed one I would probably take a chance on one...
 
I bought a repo dual- diaphragm and after a short time it started leaking at the crimp. Supplier replaced it, but got to experience the joy of replacing. If possible I would find an original to rebuild. Just because someone sells them, doesn’t make them good. All this crap comes from the same place.
 
Is there a way to test one before you install it, I’d rather replace a clutch than a booster.
 
1 Wild R/T said:
C body pedal side pushrod is different... It can be swapped when the booster is rebuilt...
Click to expand...

I shortened one and welded it back together waaayyyy back in the day......... still have it actually
 
Thanks for all the info, will check them out
 
Status
Not open for further replies.

Similar threads

Ray Bolden
HYDROBOOST BRAKE BOOSTER
Replies
2
Views
464
Derwud
Derwud
6
WTB 69 RR Quarter extension
Replies
6
Views
385
69RRMFF
6
M
65 Satellite brake conversion
Replies
2
Views
263
493 Mike
493 Mike
robl72
WTB Used Mopar Drum Brake Spindle and Backing Plate Hardware for 69 B-Body
Replies
2
Views
256
robl72
robl72
real0803
Looking for a Brake booster
Replies
3
Views
394
rmance
R
Auto Transport Service
Back
Top