revmaster
Well-Known Member
I had one bushing on a front seat. The rest only had washers. Anyone know if this what it is for . Was on drivers side seat.
Bushing on front seat stud
- Thread starter revmaster
- Start date
Ernie ingling
Well-Known Member
The”bushing” is correct the washers not. Classic or year1 have.
Aarons Air
Well-Known Member
I bought bushings from the help section in the auto parts store. Much cheaper than going through the notoriously overpriced year one.
wvmarv
Well-Known Member
Help section? There's a help section?
wvmarv
Well-Known Member
As far as I know they came stock on the seat studs. The one pictured doesn't look stock. Washers no. They are easily left off in a restoration, but to me actually make a good deal of difference in the way the seat sits.
- Local time
- 7:00 AM
- Joined
- Oct 20, 2019
- Messages
- 4,230
- Reaction score
- 3,784
- Location
- Saskatoon Saskatchewan Canada
Available in 1968, m maybe 67. 4 per seat. Building cheaper.
All my 67's have them.
- Local time
- 7:00 AM
- Joined
- Oct 20, 2019
- Messages
- 4,230
- Reaction score
- 3,784
- Location
- Saskatoon Saskatchewan Canada
I will check our 67 we bought in 1970. Never paid attention. Thanks .
1 Wild R/T
Well-Known Member
Well my 68 had Vega buckets in it so I've never seen those before.. Never seen them on E bodies & prior to my 68 hadn't owned a B body since the 70's.. And in the 70's I was paying more attention to girls than seat spacers...
That all said got dimensions? I'll have to make some for my Coronet...
That all said got dimensions? I'll have to make some for my Coronet...
- Local time
- 7:00 AM
- Joined
- Oct 20, 2019
- Messages
- 4,230
- Reaction score
- 3,784
- Location
- Saskatoon Saskatchewan Canada
I will look, they came on a 68 Roadrunner with the upgraded cloth and vinyl buckets. Still have all seats. It is in storage, might get there by mid August.
1 Wild R/T
Well-Known Member
Those I've seen, but thats not whats shown it the first post...
1 Wild R/T
Well-Known Member
I'm guessing 1.5" in diameter & .75 thick? I've got 4' of 1.5" round 6061 at the shop with no home...
I'm not sure, but just a guess is 1 1/2" diameter and about 5/8 thick. The center hole just slightly bigger than the seat studs. The little clips slide over the threads to keep them in place and they are inset for that clip. I put replacements on the 67 Coronet recently but didn't measure anything.
Similar threads
