Cam ID

[Ceedawg]

hey, got a Crane cam I need to identify, drive end- F282/393-4 other side ?8043, other end-A239-circle with an M in it. Thanks. ^ not an R at front of numbers

 

[PRHeads]

Based on those numbers it should be something like:
Flat tappet, [email protected], .393 lobe lift, 104lsa

Looks like something someone would have used in an old SS build, or old school Hemi.

Lay it next to a B/RB cam to see if 1/2 the lobes are oriented differently.

 

[Ceedawg]

Thanks, It’s a Hemi cam. Street car/4 speed, 4.1 Dana, don’t want to use the roller cam, it’s bigger.