albert alspaugh
Active Member
I m Albert from Ohio Have 3 66 Chargers one must have 67 fenders Are front fenders different? I want to take off fender turn signals but chrome strip from 66 different
Common Resto Parts they don't make for 66 / 67 Chargers
- Thread starter Maxrat
- Start date
ODZKing
Well-Known Member
Albert, welcome.
66-67 Charger fenders are same. (Coronet fenders differ only because of addition of headlamp buckets otherwise the same).
But if you have holes for fender tips, you simply need to fill them. Again, fenders were identical.
66-67 Charger fenders are same. (Coronet fenders differ only because of addition of headlamp buckets otherwise the same).
But if you have holes for fender tips, you simply need to fill them. Again, fenders were identical.
Gpuller
Well-Known Member
Quarters are not the same. They dont reproduce fenders or doors.
Those cheap quarter panel repair panels don't have the correct wheel lip flare.
I think you are asking about the Fratzog (Dodge symbol) and turn signal indicator that is contained in the last piece of fender trim on a 67 only.
66 had smooth trim all the way.
It can be swapped between finders if you are careful to cover the hole in the 67 fender with the trim.
But this is something else that is not reproduce.
Yet is should be.
I feel there is a market for it.
As I said, need some adjustment.
TN Mopar
Well-Known Member
I was surprised to find this today
Defroster Vent Ducts
This is a new product that was extremely hard to find as a good piece used
http://www.megapartsusa.com/proddetail.asp?prod=172-DF398-9R
Defroster Vent Ducts
This is a new product that was extremely hard to find as a good piece used
http://www.megapartsusa.com/proddetail.asp?prod=172-DF398-9R
Saw these too. Ordering soon, hopefully a good quality.
Maxrat
Well-Known Member
Nobody makes the one piece headliner board. No one makes interior paint for the Citron Gold interiors (console, A pillar trim, interior panels, dash, armrests). Nobody makes the correct seats belt colors for the Citron Gold interior.
Maxrat
Well-Known Member
Is there supposed to be a rubber gasket behind the trunk lip chrome trim? If so, nobody makes that. Nobody makes the rubbers inserts for the tail light housing (C shaped end pieces and the long upper chrome strip in between the C shaped end pieces).
Welcome. As said prior basically the same. If you need, I have the 66 front fender chrome. Will trade you for your turn signal indicators if they are not too bad.
They make the 67 Charger Fender T/S assemblies if that is what you are talking about...
https://moparplus.com/252-ch67-mopar-1967-dodge-charger-fender-mounted-turn-signal-indicator/
I meant the long trim pieces that it goes with.
Even for a 66.
Or we could go like NASCAR Chargers and just eliminate all the top trim except for the rear quarters?
Joe Phillips
Member
I may be able to help
Joe Phillips
Member
I may be able to help.
Joe Phillips
Member
I may be able to help.I checked AMD and it doesn't seem to even have anything for a Coronet.
http://www.autometaldirect.com/body-components-quarter-panel-c-23_145.html
Not even a skin.
If we are talking about finding a donor and cutting some metal out, would it fit all the way?
Joe Phillips
Member
I may be able to help.
Maxrat
Well-Known Member
- Local time
- 9:43 AM
- Joined
- Oct 20, 2019
- Messages
- 4,192
- Reaction score
- 3,726
- Location
- Saskatoon Saskatchewan Canada
67 headrests
- Local time
- 9:43 AM
- Joined
- Oct 20, 2019
- Messages
- 4,192
- Reaction score
- 3,726
- Location
- Saskatoon Saskatchewan Canada
I have seen a few with clips. Looked original. Not positive.
- Local time
- 9:43 AM
- Joined
- Oct 20, 2019
- Messages
- 4,192
- Reaction score
- 3,726
- Location
- Saskatoon Saskatchewan Canada
HOOD LETTERS! Ordered a set last night. Ad said about C 103.00 plus shipping and import fee. Rate changed so it became C 110.00 plus the others, bringing it to about C 141.00. I paid with a credit card, and I was billed C 179.00. I will be contacting e bay about this.
Similar threads
