Core support & inner panels

[72Fourspeed]

Don`t know if this should be here or in the bodywork section,but here goes. My support on the 63 is butchered & the inner panels are gone,replaced by a bar back to the cage. Going back to stock up front, and have found a donor 65 B Body. My questions are as follows; 1 Are the core support & inner panels the same ? 2 Are the windshield & backglass the same on 2 & 4 dr sedans the same ? Thanx, Don.

 

[ply64post]

Don`t know if this should be here or in the bodywork section,but here goes. My support on the 63 is butchered & the inner panels are gone,replaced by a bar back to the cage. Going back to stock up front, and have found a donor 65 B Body. My questions are as follows; 1 Are the core support & inner panels the same ? 2 Are the windshield & backglass the same on 2 & 4 dr sedans the same ? Thanx, Don.

Don

1. 63-65 B bodies aprons and core supports would be the same.
2.62-63 windshields are all the same no matter what model it is.
64-65 windshields are all the same no matter what model it is
63 back glass 2-dr sdn,2-dr ht 2-dr sdn 4 dr ht are the same.
64-65 back glass 2-dr sdn 4-dr ht and 4-dr sdn are the same.

Hope this will help.

Jeff

 

[72Fourspeed]

Thanx, the info available here is nothing short of amazing. Now I have to decide whether to buy the donor or new panels. Donor is a nice specimen 4 door. Go check it out tomorrow.

 

[Dodge 330]

Buy the 65 Four door and turn it into a 2 door!

 

[gtx69]

Years ago i brought repo new panels for my 62.I returned them they were too wavy for me.Think waves in the ocean.I found used ones which was a whole lot better.I always thought 62-65 inner fenders were the same.When you buy them they say they are the same.

 

[72Fourspeed]

AMD says

They are in fact the same. And that they make none of the above. Guess his info is solid,he ain`t losing or making a buck on the deal. Don

 

[ply64post]

Front end panels

They are in fact the same. And that they make none of the above. Guess his info is solid,he ain`t losing or making a buck on the deal. Don

I checked part no# for the inner panels and the core support.
62-64 inner panels L- part no. 2260439 R-2201526
65 inner panels
L-2530981 R-2201526 why the left is different I don't know?
62-65 core support L-2099335 R-2099334
Top support-2099339

Parts are all the same Dodge or Plymouth

Jeff

 

[gtx69]

Kramer did have the repo fender wells.I think they are still selling them.That is where i got mine from.I hope they look better now.

 

[Mopar Girl]

Don`t know if this should be here or in the bodywork section,but here goes. My support on the 63 is butchered & the inner panels are gone,replaced by a bar back to the cage. Going back to stock up front, and have found a donor 65 B Body. My questions are as follows; 1 Are the core support & inner panels the same ? 2 Are the windshield & backglass the same on 2 & 4 dr sedans the same ? Thanx, Don.

I have a left side 2530981 if any one needs NOS