Does anyone have an old Super Tach II?

[moparedtn]

I just picked up a new vintage Sun Super Tach II.
Unfortunately, it did not come with any of the mounting hardware.
Does anyone have an old Super Tach II (or heck, they still use the same hardware on the new ones I think) they would be willing to give up?
I don't care if the tach works. I don't even care to get the tach, just need the mounting bracket/bucket and the hollow nut that screws into the back of it to hold it.

Thanks!

 

[paytonpl3]

I think I have one

 

[moparedtn]

I think I have one

What do you have and how much would you like for it? Post a pic maybe? Thanks!

 

[Dennis H]

Mine is strapped to the column with a rusty hose clamp in honor of Galen Go V A.

 

[moparedtn]

Mine is strapped to the column with a rusty hose clamp in honor of Galen Go V A.

:headbang:
Exactly. I always had 'em on my Mopars back decades ago and got one now, just need to mount it. Wouldn't want to sell it, would ya?

 

[PeteyDaMan]

I have mine velcro'd to the inside curve of the dash next to the speedo. It's been there for 25 years

 

[66Satellite47]

Here is what I've got. PM me.

 

[lewtot184]

you guys are youngsters! i used to run the old green line two piece sun supers back in the day.

 

[moparedtn]

you guys are youngsters! i used to run the old green line two piece sun supers back in the day.

You ain't helping, Pops. :toothy10:
You're right, I'm only 53. Lots of miles for my model year, though.

- - - Updated - - -

Here is what I've got. PM me.

Only two wires, eh? That's odd. I only remember 4 wired ones.
Lead from coil, ground, power from switched source, light from dimmer.

 

[66Satellite47]

- - - Updated - -
Only two wires, eh? That's odd. I only remember 4 wired ones.
Lead from coil, ground, power from switched source, light from dimmer.[/QUOTE]

Actually there are three, one fell on the floor before I took the picture. There are four pins in the center on the board, but it looks like only 3 were connected.

 

[WileE]

I still have an original Super Tach with the control box.

 

[69a100]

Galen Go V A.

I see what you did there but the V A still needs lots of work.

I got a 4 wire that's sitting in a box.

 

[moparedtn]

Guys, I really appreciate all y'all offering up your tachs but keep in mind, I'm only in need of the bucket/bracket and hollow nut that holds it on the back of the tach - not an actual working tach.
I bought a never-used one from the 80's, so I got the tach part, just no mounting bracket/bucket.
I'd hate to waste a working tach just to get the bracket.
I'm hoping someone has a trashed old tach that I can get the hardware off of?

 

[Deleted member 214]

I had the same issue. Took a over a year, but found a trashed tack at a swap meet and used the bracket and nut off of it. Good luck!

 

[Cornpatch MO]

All kinds of them on e-bay. ..................................MO

 

[kiwigtx]

Mine is strapped to the column with a rusty hose clamp in honor of Galen Go V A.

Seriously??? I'm sure the FSM calls for it to be nailed to the hood 4 inches in front of the cowl, in front of the driver space?? :grin:

 

[moparedtn]

Seriously??? I'm sure the FSM calls for it to be nailed to the hood 4 inches in front of the cowl, in front of the driver space?? :grin:

...with wood screws from an old deck!

- - - Updated - - -

I actually called Actron/Sunpro/Bosch yesterday and asked if they'd sell me the hardware.
Answer: Nope, I gotta buy an entire new tach to get it (the new ones use the same mounting to this day!).
Oy.

- - - Updated - - -

All kinds of them on e-bay. ..................................MO

Again, I HAVE a tach. I just need the mounting for it.

 

[moparedtn]

66Satellite47 has graciously sold me his. Thanks, everyone.

 

[moparedtn]

Got the shipment from 66Satellite47 already and my new Super Tach II is installed and operational.
Happy happy happy. Thanks B!

 

[66Satellite47]

Ed, you're welcome.