Dripping heater control valve,

[joseph p.]

Hello to all,I started my 383 4 BBl stock intake manifold today and looked under the hood and found a small dripping action from copper looking cactus shaped plumbing to the firewall,can I fix or replace?it started after I dropped one of the 2 clamp down bolts from coil a top engine.the darn bolt fell in the small mouse size whole,couldn't get it out even with a magnet stick,so I pried open the front of the intake 1/2 inch , got the bolt out,loosened all bolts before lifting front of intake,torqued every bolt in sequence 40lbs,started it up ,after 2 seconds engine cut off,restarted it went to check engine then going leaking at heater control valve,but stupid me didn't think about the intake gasket to new.or could you use the old one?newbie also,I appreciate all the help.also,does anyone know if this looks like the original gaskets??

 

[Jerry Hall]

Now that you have pulled the intake, replace the valley pan. No shortcut here. Find your heater control valve issue to. That could be as easy as a misplaced corbin clamp.

 

[joseph p.]

Now that you have pulled the intake, replace the valley pan. No shortcut here. Find your heater control valve issue to. That could be as easy as a misplaced corbin clamp.

thanks friend,

 

[joseph p.]

Now that you have pulled the intake, replace the valley pan. No shortcut here. Find your heater control valve issue to. That could be as easy as a misplaced corbin clamp.

its leaking from the base of copper looking tube,you can see it in the vid.

 

[joseph p.]

its leaking from the base of copper looking tube,you can see it in the vid.

and behind face plate,will take apart this weekend to check the leak,thanks Jerry.

 

[Jerry Hall]

Those 67 heater control valves are tuff to find. Maybe yours can be repaired. If not contact Classic Auto Air. That's where I got one for my 67 Coronet 500.

 

[LowBikeMike]

Heatervalves.net, i believe. Those valves can be repaired.

 

[joseph p.]

Those 67 heater control valves are tuff to find. Maybe yours can be repaired. If not contact Classic Auto Air. That's where I got one for my 67 Coronet 500.View attachment 1758344

Heatervalves.net ,I got it,beautiful. Coronet.

 

[joseph p.]

Thank you Joe at heatervalves.net for an amazing restoration of my heater valve.excellent price also,and fast turnaround time.