Drive line

[B-Body 70]

Any thoughts on drive lines? Both my 70 and 69 b-bodys missing drive lines.

 

[493 Mike]

Any thoughts on drive lines? Both my 70 and 69 b-bodys missing drive lines.

What is your definition of a driveline?
Mike

 

[B-Body 70]

What is your definition of a driveline?
Mike

Complete drive line and trans yoke from trans to the rearend. My cars never had them . I’m in the process of getting my 69 charger drivable and putting my 70 GTX together after 20 years the charger is a servivor but has no drive line.

 

[Don Frelier]

Sounds like you need a couple of driveshafts.

 

[B-Body 70]

Sounds like you need a couple of driveshafts.

Yes sir. I know I can get them aftermarket or have them made but just wanted the mopar expertise family to give me some insight on this before I do my own thing.
Thanks!!

 

[#41]

I get mine from Denny's Driveshafts. Two so far, and soon an third.

Dennys Driveshaft and Driveline Parts home of High Speed High RPM Balanced Steel and Aluminum Drive Shaft Specialist with Free Shipping on parts orders over $99.00

 

[451Mopar]

The Charger had the 8-3/4 swapped for a Strange S-60 4:10:1 Spool, 1350 U-Joints (and yokes), Mark Williams 3.5" Chromoly driveshaft.
For the Coronet 500, building a 489 case 8-3/4" 3.55:1 Sure-track II diff, crush sleeve eliminator, 1350 yoke for another 3.5" Chromoly driveshaft.
The Coronet Convertible has a factory Dana 3.54:1 with clutch type limited skip and the Mopar 7290 U-Joints (almost the same size as the 1350, but with internal snap rings.) The Driveshaft is what came with the Kessler 5-speed conversion, and has a driveline vibration which I haven't check driveline angles yet?

 

[jimbosride]

I got one that was to long and rebuilt it then had it cut to size and re-balanced.

Old drive shafts can have issues from their age and should be gone thru for safety and smooth driving

https://www.drivelinesnw.com/service-center.html

Fife, WA 98424