Driveshaft length for 65 727 center to center with 8 3/4 rear

[black64]

Changing to the slip yoke 65 trans from the old 64 ball&trunion need drive shaft length center to center. No tranny in the car to measure

 

[wedgie]

From a '64 to a '65 trans, but what year car? Plymouth or Dodge?

 

[bluefury]

Changing to the slip yoke 65 trans from the old 64 ball&trunion need drive shaft length center to center. No tranny in the car to measure

Once you reinstall your trans.... insert the slip yoke into the trans as far as it goes without forcing. Measure from center of the slip yoke to center of the pinion yoke..... subtract 1/2".... that will be the driveshaft length.

 

[black64]

From a '64 to a '65 trans, but what year car? Plymouth or Dodge?

car is 64 plymouth. I would measure if the car had the drivetrain installed but it is not in yet.