dual quad throttle cable bracket pics or resource

[3rdelke]

don't even know what to look for. guess ill need a shorter throttle cable if anyone has one. and a bracket to hold it, as we traded our old manifold away. and maybe a bracket on carb. hate to buy a new kit as we just gave a hundred for carb linkage, thanks again bob

 

[moparsteve636]

Bob, What cable are you using now? You might consider switching the carbs! Front to rear! Your cable might be long enough for that! I might have a bracket that will work! I'll check on it.

 

[lewtot184]

this is an early b-body bracket that i did a little modifying on.

 

[black64]

Shot of Lokar bracket and cables you cut to fit might work for you. This is on my 392 hemi but should work on yours.

 

[silversedan]

would any of these work?
http://arengineering.com/products/throttle-bracket-kits/

 

[Rick62]

Attached is a picture of the bracket I'm using. It's more or less the same as the 60's Chrysler 300 2X4 cars. It can accommodate the mechanical kick-down linkage although I'm using an aftermarket cable. I bought the repop bracket from Dan Jenks. This is his website: http://dynamicrenovation.net/Contact_Us.php The part no longer shows in the online catalog but perhaps if you contact Dan he can tell you where to find one

 

[3rdelke]

thanks, maybe I should have mentioned its a 4 speed car. ill measure the length I need, the end of the cable has to go below pivot point on carb. need some kinda bracket to mount on the intake for cable

 

[Rick62]

The bracket in the picture I posted will work. You just don't use the features that are there for an automatic car. I think you'll find this is may be the only reproduction or aftermarket piece that will be a bolt on. Otherwise I think you'll have to get creative like some of the other guys have done and make something.

 

[62MAX]

Yep,and the only one that looks like it belongs there and still available from Dynamic Renovations!

 

[3rdelke]

thx, guys ill get one on order...bob

 

[3rdelke]

rick, I like it! turquoise is my color

 

[dvw]

I fabbed a bracket that fits between the carbs. Simple and less "bulky". Uses the stock cable.
Doug

 

[Jim's Maxie]

I fabbed a bracket that fits between the carbs. Simple and less "bulky". Uses the stock cable.
Doug

That's easy since you are not using progressive linkage.

 

[dvw]

That's easy since you are not using progressive linkage.

So change the connecting rod to make it progressive. Doesn't matter which carb the cable connects to..
Doug