Dyno day for the hemi

[HEMI-ITIS]

Well,I guess the scales at Englishtown must be off.There must be over 100 lbs just in undercoating on my heap.I'll bet antone a $grand the car is well over 3800 lbs.Will you be the 1st taker on that??Eventually you will see that I'm not a bullshitter and will tell it like it is.I can go keyboard rounds with the best of 'em.It's all entertainment.Just remember you two say I don't have have 2 nickels to rub together.So how in the world could my junk make 900 HP and over 800 ft lbs of torque with only 10 lbs of boost.I will be more than happy to grab a lane after I get my junk sorted out.imp4:

 

[mark42202]

Easy... it's a Hemi with a blower, not rocket science.

BTW, The Standard Catalog of American Cars 1945 - 1975 states that factory shipping weight (with no fuel) for the 1963 Fury was 3215lbs. Add another couple hundred for the blower and cage, and a couple hundred for you, and you're still right around 3600. Unless, of course, historical data is all lies and a conspiracy against you and your car....?

 

[HEMI-ITIS]

sure,,,,,,,whatever you say,you willing to bet on that??

 

[SUPERSTOCKRACER]

my fully loaded 63 plymouth savoy weighs 3412 lbs. with me in it is 3620 lbs.

so something is wrong.

 

[SUPERSTOCKRACER]

So how in the world could my junk make 900 HP and over 800 ft lbs of torque with only 10 lbs of boost.I will be more than happy to grab a lane after I get my junk sorted out.imp4:

you made 746 hp on pump gas. far off from the numbers you think you were going to make because you didnt listen to the engine builder. using the same ol old parts from your last build.
patrick from prosystems hit your hp numbers right on. unported steel heads and a baby cam wont make you 1100 hp.:sad4:

 

[HEMI-ITIS]

NEW Callies crank,NEW Manley rods,New custom Diamond pistons.Valve job by RYANj,,,,,,,,,,,,,,,,so you must be talking about my old Comp cam and just rebuilt Comp lifters and the blower was just freshened.Or maybe the old oil pan.This is a street driven toy,I think 700 HP will be just fine for the street.:jerk:

 

[SUPERSTOCKRACER]

NEW Callies crank,NEW Manley rods,New custom Diamond pistons.Valve job by RYANj,,,,,,,,,,,,,,,,so you must be talking about my old Comp cam and just rebuilt Comp lifters and the blower was just freshened.Or maybe the old oil pan.This is a street driven toy,I think 700 HP will be just fine for the street.:jerk:

how are those SV1'S workin out for ya?:wtg2:

 

[70Hemi]

awesome. would be interested what you all have in that motor. I have never had mine on a dyno.

 

[HEMI-ITIS]

you made 746 hp on pump gas. far off from the numbers you think you were going to make because you didnt listen to the engine builder. using the same ol old parts from your last build.
patrick from prosystems hit your hp numbers right on. unported steel heads and a baby cam wont make you 1100 hp.:sad4:

So your sayin that my STOCK iron heads and tiny little BABY cam will only get mE 1000 Hp FOR MY STREET CAR?????OH NO!! SAY IT AIN'T SO:icon_puke_r::icon_oak::eusa_wall::grin::upside down:ottytrain2:

 

[SUPERSTOCKRACER]

So your sayin that my STOCK iron heads and tiny little BABY cam will only get mE 1000 Hp FOR MY STREET CAR?????OH NO!! SAY IT AIN'T SO:icon_puke_r::icon_oak::eusa_wall::grin::upside down:ottytrain2:

I'm saying you aint going faster than 9.75. and thats the fact.
if you ever get it back together.Weed and procrastination go hand in hand.plus money is tough to come out of your wallet as we all know.:icon_weed::frustrated:

 

[HEMI-ITIS]

I'm saying you aint going faster than 9.75. and thats the fact.
if you ever get it back together.Weed and procrastination go hand in hand.plus money is tough to come out of your wallet as we all know.:icon_weed::frustrated:

Who's the "WE"?????Is that you and all your other SCREEN NAMES?????
So if a .75 is all I got,then you'll have no problem betting $100 per 1oth???

 

[SUPERSTOCKRACER]

Who's the "WE"?????Is that you and all your other SCREEN NAMES?????
So if a .75 is all I got,then you'll have no problem betting $100 per 1oth???

indeed!
you got nothing because either your going to grenade the trans. or detonate the motor cuz you know you hate to buy race fuel! and i aint got all year either.
at this rate i'll be 65 before your ready.

 

[HEMI-ITIS]

It's a good thing I have these GENIUSES advising me how to make power and shift gears.Where would I be without thier expertise:jerk::jerk::jerk::jerk:

 

[SUPERSTOCKRACER]

:knob::so its been almost a month now, got that big bad hemi in the car yet?
converters dont take that long to get?::

 

[SUPERSTOCKRACER]

Mopars at the valley this weekend!
bring it up.
I WANT TO DRAG YOUR *** DOWN THE TRACK.:headbang:

 

[HEMI-ITIS]

So you want to race my street car???Lets go for a 15 to 20 mile drive and then line 'em up,then I'll bring a "J" hook to drag your *** back to the track because you couldn't make the drive.Why don't you race Clinton or Tony???They have made the offer many times but nothing but excuse after excuse.:tongue:How 'bout you race one of your other screen mames:violent-smiley-100::jerk::jerk::jerk:

 

[HEMI-ITIS]

How did that bath work out for ya?????????You know,the forclosure on the beach house??:tongue:

 

[SUPERSTOCKRACER]

:laughing::backontopic:another ridiculous reply.
answer the question. Why arent you ready, you keep putting up all these pictures of your car unfinished. whats the holdup? i think its one word or maybe 2!

 

[HEMI-ITIS]

:knob::so its been almost a month now, got that big bad hemi in the car yet?
converters dont take that long to get?::

Call Joe @PRO TORQUE yourself and ask what the turn around time is.You bust my stones,yet the black car was supposed to be done for the Kentucky race,excuses.You were goin to Indy for Josh's race,more excuses{flat tire on the trailer}Then you were coming to SHAKEDOWN.Excuses and more excuses.Just keep playin IN :icon:icon YOUR OWN SAND BOX WHERE YOU MAKE YOUR OWN RULES

 

[HEMI-ITIS]

:laughing::backontopic:another ridiculous reply.
answer the question. Why arent you ready, you keep putting up all these pictures of your car unfinished. whats the holdup? i think its one word or maybe 2!

It's just like when you were told your engine would be done in 8 weeks,28 weeks later you got it back.