Edelbrock RPM heads - what type of intake gaskets???

[jmichaelc802]

OK- this may seem to be a simple question, but I can find anything out there on it...
I've got Edelbrock RPM heads, Edelbrock Torker Intake... what intake gaskets do I have/need to have? Is a valley pan enough? Do I need Felpro gasket against the heads, then the valley pan, do I need Felpro gaskets on both sides of the valley pan? Thanks...

 

[Kern Dog]

I use a Fel Pro paper gasket to the head, the valley tin then a paper gasket over the tin. It is a gasket sandwich. I do this because I have aluminum heads and intake and do not like leaks. I currently have thicker than stock head gaskets to reduce compression. Due to this, I need to use thicker intake gaskets since the heads are further off of the block.
Fel Pro RB vallet tin #1215.
Fel Pro thin gaskets...#MS90175.
Mr Gasket thick intake gaskets #301.