Glove Box Plunger Switch Hole Plug?

[archangel]

'70 Super Bee. I am restoring back to factory original. My car did not come with A01 Light Group. The previous owner had installed some A01 items including the glove box light. I removed the plunger switch/lens and repaired the lens hole in the box.

Is there a plug that is supposed to fill the plunger switch hole or did non-A01 cars just have the open hole?

 

[70gtx440dana]

Not aware of a plug.....either switch or open hole.

 

[kiwigtx]

'70 Super Bee. I am restoring back to factory original. My car did not come with A01 Light Group. The previous owner had installed some A01 items including the glove box light. I removed the plunger switch/lens and repaired the lens hole in the box.

Is there a plug that is supposed to fill the plunger switch hole or did non-A01 cars just have the open hole?

You could use a black body plug - one the same as the firewall tachometer .... 7/8" I think will fit.

 

[archangel]

Thank you. I think I will go with the open hole then.

A plug would not doubt look a lot better, not that I will be opening the glove box that much, but I am striving for OE look for better or worse.