Has anyone here used Versatube for a building?

[747mopar]

I just recently had a 12×36 put up for our Tritoon, having seen a few installed previously I chose to put in my anchoring.. in Ohio they stake them to the ground with rebar. Being 36' long I drilled 3' deep holes every 6', poured them full with concrete then anchored treated 6×6's to the tops. When they showed up all they had to do was lag bolt it down and erect it. I didn't pay for any add ons just reinforced what I felt it needed when they were done.

I like the treated lumber approach, keeps the steel up off of the damp ground and gives you a nice 6" tall boundary to keep the gravel inside and out of the yard.

 

[YY1]

In FL, you get giant "screws" for anchors that are about 5" across and 24" deep or longer.

The ones I have have more turns to the screw.

 

[joe smith]

I am going to pour a concrete "curb" to set it on ( hopefully poor a slab under it later) and where an anchor hole goes dig a 24" deep hole and fill it with concrete after installing a LONG anchor bolt in the hole....