Has anyone moved their bucket seats back? 64 Polara

[440 4 speed]

If your seat brackets are the same as a 66, there are adjustable locations where the lower bracket bolts to the brackets on the seat frame. You can see the two bolts that hold the two brackets together.

View attachment 1835271

Thanks that’s what I was trying to explain.

 

[WileE]

EDIT: I just looked at the photos and it looks like there should be plenty of room. I may need to go on A diet. I am pretty thick around the middle.

Leave the car alone. Here :

use this. Nobody else has to know.

 

[coloradodave]

Thanks. An inch or two would make a big difference I think. Add 2" and then adjust the seat as needed. The way it is now, it is back all the way and not far enough. I think I'll give them a try.

Those are very similar to the ones I made, except mine were one longer piece per side. If you like fabricating, $10.00 worth of aluminum and a little time will get you there; otherwise the ones shown above should take care of it for you. Pull the bolts/nuts off your driver's seat and set it back a couple of inches and then carefully sit in it. Better?