Help with brakes

[dart6]

I used a MBM MC1323 m/cyl and removed the rear residual valve. They're both 7lb

 

[1STMP]

I used a MBM MC1323 m/cyl and removed the rear residual valve. They're both 7lb

The front discs should never
be more than 5lbs. where
2lbs is more or less standard
7lbs for the rear drums is
bordering on minimal and
should be closer to 10lbs.
I run a 2lb front and rear on
a 4 disc system. 1-1/8 MC
bore. Has good firm pedal
and no brake reaction lag.

 

[dart6]

I'll bleed the brakes again when i get back from holiday

 

[1KoolBee]

With 1in the pedal is just off the floor

My bee is factory manual 11” drums. Travel is maybe an inch or so. You may have air in one of the lines.

 

[dart6]

My bee is factory manual 11” drums. Travel is maybe an inch or so. You may have air in one of the lines.

I think so

 

[dart6]

There was an air bubble in one line and the proportioning valve wasn't dialed in. Once those two were addressed we're good to go
Thanks for the help everyone