Hemi jetting

[doctordodge]

I'm rebuilding the carbs on my '67 GTX. The front carb came apart with a bent metering rod on one side. Not to mention that they were mismatched. A 76 and a 136. Where would be a good place to start on the primary side? I have a couple jet kits so have options.

 

[Nate S]

https://www.hamtramck-historical.com/1967Hi-PoParts-01.shtml

Try here. Look at page 2, top right corner in the grid.

 

[doctordodge]

Thanks Nate! That looks like a great site. I’ll try a set of 167’s

 

[Fran Blacker]

This has step up rod numbers. Has a question mark on rear carb.

 

[doctordodge]

There was on 136 in it so that kind of makes sense.