Hemi rocker arms

[Bird 426]

Pulling my hair out over rocker arms for my 426 Hemi. I just haven't found the right place. Stock rockers, need to have the tips resurfaced, bushings are alright in my opinion. Would or can go to a roller rockers, but that is more of a can of worms than where I am at. Street car, 4-speed. Planned on hydraulic roller, but have a solid that was in the engine. Edelbrock Jr heads. Seems like the 3 places that I have called don't have answers. Help me Batman!

 

[Bird 426]

Just found a place to resurface my stock rocker arms. Can't believe that it's local to me, 20 miles. Will see if this works out.
Thanks

 

[snakeoil24]

Keep us posted also check rocker shafts for wear.

 

[rickseeman]

There has been so many 426 Hemi rocker arm questions lately. I think I've resurfaced those tips on the back of a standard Kwik-Way valve grinder. I got an e-mail from a guy in Norway this morning trying to figure out what he needed for rockers on his first Hemi build. I told him I would do a video today to try and discuss his various options.

 

[rickseeman]

Here is a video on some of the rocker arms available and test fitting the Canadian rockers.

 

[Bird 426]

Thank you for the video! I was warned off on the Barton rockers, just more work, not that they aren't an excellent rocker. Took my rockers off the shafts and stands tonight, they have been around the block a time or two. I have 1 intake and one exhaust that may need replacing. Pretty deep pitting. The banna shafts don't look new, but everything seems tight, I will run them. forhemisonly has a roller rocker arm, have no idea what they look like or if they are basic simple to install or complicated. They don't have a bad price, I think she said around $2450? Out of stock for 2 weeks. Those Canadian rockers for around $1,200., didn't someone say they were not lasting 1000 mi? Not going to try those, no refunds or warranty with them. Will stay with resurfacing my stock rockers for the moment. See if I need to adj my pushrod lengths, maybe Smith adj too.
Thank you for the lessons!

 

[1 Wild R/T]

About Rocker Arms Unlimited

Long history of rocker arms 25 years experienced employee owned.

rockerarms.com

Twenty years ago they were the best.. Ten years ago they nearly went out of business... Lately everything I've heard has been very positive...

They do beautiful work...

 

[Fran Blacker]

If you have $250 to take a chance on or waste try these. I know nothing about them!
MOPAR 426 Hemi rocker arms | eBay

 

[rickseeman]

I've never seen those in person but I prefer roller rockers.