im looking for a template to install a wing or a spoiler on my 72 charger

[wemuhlbaier]

HI everyone I'm new to this site...if someone can help me or point me in the right direction I would appreciate. Thanks Wayne

 

[Car Nut]

aboard!

 

[Bb70charger500]

Welcome to the site I'll send you a p.m. I can help you out I have a factory winged trunk lid in the shed

 

[mrsnicks]

Look underneath the trunk lid. It should have the mounting holes underneath and just drill up from the bottom. Get a 2nd opinion because I've never installed one, but I was pretty sure all trunks had the cutouts/holes underneath.

 

[super-bee_ski]

Welcome aboard and thanks for joining the forum!

 

[snakeyes]

hi and welcome to the site :headbang:

 

[71charger_fan]

When I put the front on my '71, I took off the front valance and placed it upside down on blocks. Then, I placed the spoiler on the valance, got it centered, then moved it forward and back until its contours and the contours of the valance matched, then taped it in place, verified its placement, then marked and drilled the holes. I used large fender washers, painted black, against the spoiler to spread out the load to avoid cracking and splintering.

 

[wemuhlbaier]

thanks for the info..but I'm doing the rear spoiler on the trunk lid..thanks Wayne

- - - Updated - - -

thanks... but no cut outs

- - - Updated - - -

Hi..Pictures or measurements would be great. I want to get it right the first time...My email addresses is ................. thank you for your time and trouble. Have a awesome day...Wayne from South Jersey.

Please do not post email addresses here as per site rules - use the Private message function

 

[Budnicks]

welcome to FBBO

try posting this question in the General discussion section
or maybe year specific 72 B-Body forum section here
this is the welcome wagon more for intros etc., than tech question & answer section

have you tried Google search or
our FBBO search option on the top right of the page,
it may narrow it down if someone has posted it before...

good luck, either way

 

[Bb70charger500]

I sent you the email but wanted to put the pictures up on here if anyone else needed the measurements


- - - Updated - - -



- - - Updated - - -



- - - Updated - - -



- - - Updated - - -

The last two are the template I made up for you , I'll get it in the mail

 

[Bb70charger500]

By the way not all trunk lids have the holes only the factory go wing cars , I've had quite a few of them with and without .one of the above pictures is of my gold trunk lid with out holes